laser diode 1 publication date: november 2003 shb00002aed LNC710PS algaas-infrared laser diode features ? oscillation wavelength: 784 nm ? radiant power: 130 mw (with 260 mw pulse) ? small package: 5.6 mm applications ? cd-r/rw absolute maximum ratings t a = 25 c parameter symbol rating unit radiant power cw p o 130 mw pulse p o 260 mw reverse voltage laser v r 2v pin v r(pin) 30 v power dissipation p d(pin) 150 mw operating ambient temperature t opr ? 10 to + 60 c storage temperature t stg ? 40 to + 80 c 1 : ld anode 2 : common case 3 : pd cathode l5 package unit : mm internal connection 2.0 x 1.0 y 0.4 1 2 3 5.6 +0 - 0.025 1.0 0.25 referance plane 1.2 2.3 3- 0.45 6.5 (1) (3) (2) ld 1 3 2 parameter symbol conditions min typ max unit threshold current i th cw 20 27 40 ma operating current i op cw, p o = 130 mw 120 150 180 ma operating voltage v op 1.8 2.1 2.5 v oscillation wavelength l 780 784 787 nm differential efficiency cw, p o = 125/i op (130 mw) ? i op (5 mw) 0.85 1.05 1.20 w/a beam radiation angle horizontal // cw, p o = 130 mw 8.0 9.0 10.5 vertical 15.0 17.0 19.0 optical axis accuracy x direction x ? 1.5 ?+ 1.5 y direction y ? 2.0 ?+ 2.0 astigmatism difference * as ?? 3 m accuracy of emission point ? x ? 80 ?+ 80 m ? y ? 80 ?+ 80 m ? z ? 80 ?+ 80 m electro-optical characteristics t a = 25 c 3 c note) * : guarantee of designed specification.
2003 sep request for your special attention and precautions in using the technical information and semiconductors described in this material (1) an export permit needs to be obtained from the competent authorities of the japanese government if any of the products or technical information described in this material and controlled under the "foreign exchange and foreign trade law" is to be exported or taken out of japan. (2) the technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. it neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) we are not liable for the infringement of rights owned by a third party arising out of the use of the technical information as described in this material. (4) the products described in this material are intended to be used for standard applications or general elec- tronic equipment (such as office equipment, communications equipment, measuring instruments and house- hold appliances). consult our sales staff in advance for information on the following applications: ? special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combus- tion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. ? any applications other than the standard applications intended. (5) the products and product specifications described in this material are subject to change without notice for modification and/or improvement. at the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date product standards in advance to make sure that the latest specifica- tions satisfy your requirements. (6) when designing your equipment, comply with the guaranteed values, in particular those of maximum rat- ing, the range of operating power supply voltage, and heat radiation characteristics. otherwise, we will not be liable for any defect which may arise later in your equipment. even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) when using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) this material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of matsushita electric industrial co., ltd. 2003 sep caution for safety danger this product contains gallium arsenide (gaas). gaas powder and vapor are hazardous to human health if inhaled or ingested. do not burn, destroy, cut, cleave off, or chemically dis- solve the product. follow related laws and ordinances for disposal. the product should be excluded form general industrial waste or household garbage. do not touch or look into the laser beam directly. the laser beam may cause injury to the eye or skin, or loss of eyesight.
|
